820AL / 820ALN: OBD w/ Locking Quad / Stand-Off

Submittal Form
SKU: 820AL Category: Tags: , ,


The 820AL and 820ALN are manual, aluminum opposed blade dampers with a locking quadrant to regulator airflow in square or rectangular duct systems. The opposed blade design distributes air evenly over the face of the damper, thereby reducing noise and turbulence when damper is restricting airflow. Individual synthetic blade bushings prevent the blade pivot from rattling in the frame. These are high free area dampers for lower pressure drop across the dampers. These dampers are 2 1/8″ deep and the blades are contained within the frame.

The 820AL provides a locking quadrant with a position indicator.

The 820ALN provides a locking quadrant on a 1″ base for an exterior insulated duct.

The 820ALN-2 provides a locking quadrant on a 2″ base.

The 820ALN-3 provides a locking quadrant on  a 3″ base.


Additional information


.050 Aluminum Extrusion with Reinforcing Channels


.050 Aluminum Extrusion with Reinforcing Channels


3/8" sq.


Stainless Steel

Blade Bushing

Individual Synthetic

Low Leak Seals

Not Available

Frame Width

2 1/8" Wide

Blade Width

1.438" – Contained Within Frame

Max Size

24" x 24" Side Controlled, 36" x 24" Bottom Controlled

Min Size

3" x 3"

Size Information

Dampers 37" – 60" Wide will be jackshafted