what do i need to buy buspar can i get albenza over the counter how to get valtrex in the us purchase persantine getting pregnant on lamictal 

FLEX SHAFT

Direct Rotation made EASY!

Flexible shafting is a direct mechanical method for transmitting rotary motion between two points.  Rotation of the Ceiling mounted regulator turns the shaft which in turn rotates controller or the damper itself.  For years this was accomplished with rigid square steel rods.  As you can imagine it was tricky to get the damper, rod and controller all lined up.

Flexible Shaft Control Rods (Flex Shaft) has largely replaced square steel rods for damper control.  Like the Bowden System, Flex Shaft provides an easier, more forgiving way to install remote dampers over hard ceilings.

The Flex Shaft is single wire wrapped with a smaller brass finished wire on  the outside.  The finished diameter is 0.25″.  The rugged wrapped construction produces a strong robust turning member capable of delivering more than 50 Lbs of torque.  It turns inside a sheath of either polyethylene or aluminum.

How Does it Work?

The animated image to the right is a good illustration of how the Flex Shaft system works. When the philip’s head (PLBR) is rotated, it causes the radial damper demo to swing closed.

Dampers First

Select the dampers you need.  Young Regulator has several styles of
dampers set up for flex shaft control.

WITHIN AIRSTREAM

Rectangular

821A-FS

Round

RAD

Round

Rectangular

Round

Rectangular

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search